NVIDIA MFS1S50-VxxxE Active Optical Splitter Cable Ethernet 200GbE to 2x100GbE QSFP56 to 2xQSFP56 LSZH Black Pulltab 3M/5M/10M/15M/20M/30M
200GbE to 2x100GbE QSFP56 to 2xQSFP56 MMF Active Optical Splitter Cable

NVIDIA MFS1S50-VxxxE is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser), cost effective 200GbE to 2 x 100GbE active optical breakout cable (AOC) designed for use in 200GbE Ethernet systems.

The MFS1S50-VxxxE cable is compliant with SFF-8665 for the QSFP56 pluggable solution. It provides connectivity between system units with a 200GbE connector on one side and two separate 100GbE connectors on the other side, such as a switch and two servers. The cable connects data signals from each of the 4 MMF (Multi Mode Fiber) pairs on the single QSFP56 end to the dual pair of each of the QSFP56 multiport ends. Each QSFP56 end of the cable contains an EEPROM providing product and status monitoring information, which can be read by the host system.

Rigorous production testing ensures the best out-of-the-box installation experience, performance and durability. NVIDIA Networking's unique quality active fiber cable solutions provide power-efficient connectivity for data center interconnects. They enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers.
 

Highlights

    200GbE to 2x100GbE data rate

    4x 50Gb/s PAM4 modulation

    Programmable Rx output amplitude and pre-emphasis

    SFF-8665 compliant QSFP56 port

    Single 3.3V power supply

    4.35W power dissipation (typ., 200G end)

    Bit Error Rate (BER) better than 1E-15

    Up to 30m length

    Hot pluggable

    RoHS compliant

    IEEE 802.3 200GBASE-SR4 and 100GBASE-SR2 compliant

    SFF-8636 compliant I2C management interface